弧焊电源动态特性测试方法的研究

本文对弧焊特性、特别是它的动特性进行了讨论，与过去传统的时域法不同，文中提出了用频域法分析弧焊的电源特性的设想，文内中方法的理论、实验方法及实测结果进行了讨论。     

Water Cherenkov detectors:MILAGRO

This paper discusses the properties of using the water Cherenkov technique to detect air showers in the few hundred GeV to 100 TeV energy range. The responses of a 6 m² 2 m deep water Cherenkov counter and that of a 6 m² 10cm thick scintillator-lead sandwich counter to air shower electrons and photons is described. The advantages of water Cherenkov detector is outlined. Its application to do VHE gamma ray astronomy is discussed with particular reference to the MILAGRO telescope currently under construction. Milagro, a water-Cherenkov detector to do gamma ray astronomy above 100 Gev, uses an existing pool 60m × 80m by 8m, located in the Jemez mountains near Los Alamos, NM. The threshold of the MILAGRO detector is comparable to atmospheric Cherenkov detectors, however it has several advantages over these optical detectors. MILAGRO can operate 24 hours a day in all weather conditions and it has an open aperture which allows it to view the entire northern sky every day. These capabilities allow for a systematic all-sky survey to be done for the first time at these energies. MILAGRO will measure the Crab spectrum with high significance over a wide energy range, it will detect and measure the spectra from AGN's such as MRK 421 and it will search for short duration bursts from GRBs and possibly evaporating PBHs.     

现场动平衡技术在生产中的应用

利用美国恩泰克公司提供的DP1500数据采集仪及现场动平衡软件,以实例说明了现场动平衡技术在锅炉引风机、排粉风机、电动机、机泵等转动设备不平衡故障排除中的应用,介绍了不平衡故障的识别方法,揭示出该技术在生产中的实用性、先进性和经济性.     

电液位置伺服系统的动态试验研究

本文研究了快速响应的电液位置伺服系统动态试验,着重讨论了在实践中如何选择伪随机二位式最大长度序列(PRBS)参数的问陋,并提出快速响应系统PRBS参数选择的原则,使系统辨识精度提高约15％。     

高精度算术运算

本文针对当前各种计算机高级语言运算精度的不足，用PASCAL语言实现了高精度的加、减、乘、除算术四则运算。以满足教学、科研的实际需要。     

Modelling of Spall in an Anisotropic Aluminium Alloy

Spall caused by hypervelocity impacts at the lower range of velocities could result in significant damage to spacecraft. A number of polycrystalline alloys, used in spacecraft manufacturing, exhibit a pronounced anisotropy in their mechanical properties. The aluminium alloy AA 7010, whose orthotropy is a consequence of the meso-scale phase distribution or grain morphology, has been chosen for this investigation. The material failure observed in plate impact was simulated using a number of spall models. The Hugoniot elastic limit and spall strength have been studied as a function of orientation, and compared to experimental results.     

八丝热线探针制作及其应用

介绍了八丝热线探针的制作工艺,有效地消除了各热丝探头之间的电信号干扰和动力学干扰。实验中使用该探针检测到了湍流边界层内的大尺度旋涡,并测量了它们的强度和尺度。与此同时还获得了速度、湍流强度和功率谱等流场参数,结果与现有典型数据一致。说明本文所述的多丝热线探针具有很强的实用性。     

死亡是生命的必然归宿

本文根据物质系统演化的规律，平衡原理及熵理论，阐述了死亡是生命系统演化的必然归宿。     

低轨道带可变翼的平板型极高真空分子屏

本文计算了在低轨道自由飞行的平板型分子屏（ＷａｋｅＳｈｉｅｌｄＦａｃｉｌｉｔｙ）加了可变翼后，分子屏后实验区的压力分布。计算中考虑了分子屏和翼材料出气对实验区压力的影响。本文并对加可变翼和不加可变翼、考虑出气和不考虑出气几种情形进行了计算和比较。我们的结果表明：给轨道分子屏加上可变翼后，其实验区的压力可比不加可变翼降低一个数量级以上，压力达１０－１３Ｐａ。本文的研究表明，这种给轨道分子屏加可变翼的模型对更好的利用分子屏环境是非常有利的。     

动态差压检测系统的共模误差研究

主要针对以差压变送器为核心的动态差压检测系统的特点 ,应用流体网络分析方法 ,提出了动态差压检测系统中的共模误差问题。理论分析和仿真计算结果表明 :共模误差与检测系统两侧引压管路的不一致性直接相关 ,为了获得动态差压信号的准确检测 ,必须对动态差压检测系统的共模误差予以抑制